EN
AC-019C IEC C8 Figure 8 Power Socket
The AC-019C is a high-quality, panel-mounted IEC C8 Figure 8 power socket designed for universal AC power input solutions for consumer, commercial, and light industrial electronic devices. Built with a 90-degree right-angle pin structure and snap-in panel installation design, this two-core non-grounded power inlet offers a compact size, stable electrical conductivity, outstanding safety performance, and long mechanical service life.
Product Overview
The AC-019C is a high-quality, panel-mounted IEC C8 Figure 8 power socket designed for universal AC power input solutions for consumer, commercial, and light industrial electronic devices. Built with a 90-degree right-angle pin structure and snap-in panel installation design, this two-core non-grounded power inlet offers a compact size, stable electrical conductivity, outstanding safety performance, and long mechanical service life. Fully compliant with global IEC 320 C8 industry standards and EU RoHS environmental regulations, the AC-019C power socket is manufactured with high-temperature flame-retardant insulating materials and high-purity copper conductive terminals. It effectively solves common problems of ordinary power sockets such as poor contact, overheating, oxidation aging, and insulation failure. Suitable for long-term continuous operation in various complex environments, this product is a standard universal power accessory widely used in global electronic equipment production, assembly, and after-sales replacement scenarios.
With strict factory testing and standardized production processes, the AC-019C maintains consistent quality in mass production. It supports wide voltage adaptation of global power grids, perfectly matching the power supply needs of electronic equipment in Europe, North America, Southeast Asia, and other regions, becoming a cost-effective and reliable core component for global electronic manufacturers.
Specifications & Parameters
1. Product Specifications & Technical Parameters
All parameters of the AC-019C power socket are tested in accordance with international electrical industry standards, with accurate data, stable performance, and strong universality. The complete electrical, mechanical, material, and environmental adaptation parameters are as follows:
1.1 Electrical Performance Parameters
| Part Number | 119000001 |
| Rated Working Voltage | AC 250V 50/60Hz |
| Rated Load Current | 10A |
| Applicable Wide Voltage Range | 100V-240V global universal voltage |
| Contact Resistance | ≤0.03Ω, ultra-low resistance to reduce power loss and heat generation |
| Insulation Resistance | ≥100MΩ (tested under 500VDC condition) |
| Dielectric Strength | Withstands AC 2000V high voltage for 1 minute without flashover, breakdown or leakage |
| Working Frequency | 50Hz/60Hz dual-frequency universal, adapting to global grid standards |
1.2 Mechanical Structural Parameters
Product Standard: IEC 320 C8 Figure 8 two-core power socket (no ground wire)
Installation Method: Snap-in panel mounting + 90-degree right-angle PCB soldering pins
Plugging Force: Standard 3N-20N, moderate elasticity for convenient plugging and firm connection
Mechanical Service Life: More than 10,000 plugging and unplugging cycles
Terminal Structure: Integrated molding soldering pins, firm and not easy to deform
1.3 Material & Environmental Parameters
Shell Material: High-strength PA66 nylon insulating material
Flame Retardant Grade: UL94 V-0 high-grade flame retardant, self-extinguishing and fireproof
Conductive Material: High-purity copper alloy, anti-oxidation, anti-corrosion and high conductivity
Working Temperature Range: -40℃ to +70℃
Storage Temperature Range: -50℃ to +80℃
Working Humidity: 45%-85% non-condensing humidity environment, moisture-proof and anti-aging
1.4 Compliance Standards
The AC-019C power socket complies with IEC 320 international electrical safety standards, EU RoHS environmental protection directives, and ISO production quality management system specifications. It has no harmful substances, meets global environmental protection and safety certification requirements, and can be freely exported and sold in major markets around the world.
Product Features & Core Competitive Advantages
Compared with ordinary low-cost C8 power sockets on the market, the AC-019C has achieved comprehensive upgrades in safety, stability, durability, and compatibility, with obvious practical advantages for equipment manufacturers and end users.
2.1 Industrial-Grade Safety Performance, Eliminate Electricity Risks
The entire insulating shell of the AC-019C adopts UL94 V-0 flame-retardant PA66 material, which has excellent high temperature resistance and fire resistance. In case of circuit short circuit or local high temperature, the socket will not melt, burn or spread open fire, effectively avoiding electrical fire accidents. The ultra-high insulation performance can completely isolate current leakage, preventing electric shock and equipment failure risks. The built-in elastic clamping structure ensures a tight fit with standard C8 plugs, avoiding poor contact and local overheating caused by loose plugging. All electrical performance indicators exceed industry standard requirements, providing long-term safe power supply guarantee for electronic equipment.
2.2 Ultra-Stable Conductivity, Low Energy Consumption & No Heat Generation
The conductive terminals are made of high-purity copper alloy and processed with professional anti-oxidation surface treatment, with ultra-low contact resistance. During long-term continuous power supply operation, the socket will not generate excessive heat, and there is no power attenuation or voltage drop. Different from inferior iron and low-purity copper sockets that are easy to oxidize and rust, the AC-019C maintains stable electrical conductivity for a long time, effectively avoiding equipment crash, signal abnormality and working failure caused by poor power contact, and greatly improving the overall operation stability of electronic products.
2.3 Compact Mini Design, Easy Installation & Strong Compatibility
Adopting 90-degree right-angle horizontal pin design, the AC-019C saves more internal space of equipment than traditional vertical sockets, and is very suitable for thin and miniaturized electronic products. The international standard C8 Figure 8 interface size ensures 100% universal compatibility, which can perfectly match all standard C8 power plugs on the market without any modification. The snap-in panel installation method is simple and efficient, and the soldering pins are firmly combined with PCB board, not easy to fall off. It can be seamlessly replaced with old and damaged C8 sockets of various brands, greatly reducing equipment assembly and maintenance costs.
2.4 Super Durability & Strong Environmental Adaptability
After professional mechanical life test, the product can withstand more than 10,000 times of plugging and unplugging, with far longer service life than ordinary products. The shell has excellent anti-aging, anti-corrosion and impact resistance, and can work stably in high temperature, low temperature and humid environments for a long time. The conductive terminals are not easy to oxidize and deform, ensuring no failure after long-term use. With low failure rate and high stability, it effectively reduces the after-sales maintenance pressure of electronic equipment manufacturers.
2.5 High Cost Performance & Green Environmental Protection
On the premise of high-standard performance, the AC-019C realizes standardized mass production, with stable quality and competitive price. It fully complies with global environmental protection standards, does not contain lead, mercury and other harmful substances, and meets the green export requirements of electronic products. Long service life and low failure rate greatly reduce the replacement and maintenance cost for users, bringing long-term economic benefits.
Wide Application Scenarios
Relying on universal specifications and stable performance, the AC-019C power socket is widely used in all kinds of medium and small power electronic equipment with C8 power input interface, covering household, commercial, office, audio-visual and maintenance fields.
3.1 Household Consumer Electronics
It is suitable for smart speakers, desktop audio, TV set-top boxes, game consoles, power adapters, small household humidifiers, air purifiers, electric fans and other household equipment. The safe and stable power supply performance ensures the daily safe use of household electrical equipment.
3.2 Office & Commercial Equipment
Widely applied in printers, scanners, projectors, commercial displays, POS cash registers, office power supplies and other commercial equipment. It adapts to long-term uninterrupted office work, effectively avoiding equipment shutdown caused by socket failure and improving office efficiency.
3.3 Professional Audio-Visual Equipment
Perfect for power amplifiers, audio decoders, mixers, professional speakers and stage audio equipment. Ultra-stable power transmission avoids current noise and sound distortion, ensuring pure and stable sound quality of professional audio equipment.
3.4 Industrial & Experimental Equipment
Applicable for precision instruments, testing equipment, communication auxiliary equipment and light industrial control equipment. It adapts to complex industrial environments and provides accurate and stable power support for precision equipment operation.
3.5 Equipment Maintenance & Replacement
As a standard universal C8 socket, it can perfectly replace all aging and damaged Figure 8 power sockets, which is the preferred accessory for electronic equipment after-sales maintenance and renovation.
Frequently Asked Questions (FAQ)
Q1: Is the AC-019C compatible with global power supply standards?
A1: Yes. The AC-019C supports 100V-240V wide voltage and 50/60Hz dual frequency, fully adapting to the power grid standards of Europe, America, Asia and other global regions. It can be used for all exported electronic equipment.
Q2: Can this socket match all standard C8 Figure 8 plugs?
A2: Absolutely yes. The product is produced in strict accordance with IEC 320 C8 international standard size, with standard interface hole position and structure, realizing 100% universal matching with all mainstream C8 plugs on the market.
Q3: What is the advantage of 90-degree right-angle pin design?
A3: The right-angle horizontal installation design greatly saves the internal space of equipment, which is more suitable for thin and miniaturized electronic products than traditional vertical sockets, with wider application range and higher assembly flexibility.
Q4: Is the product safe for long-term continuous operation?
A4: Very safe. With UL94 V-0 flame retardant grade, 2000V high voltage resistance and ultra-low heat generation performance, the socket can operate stably for a long time in the rated load range without aging, overheating or safety hazards.
Q5: Does the product meet export certification requirements?
A5: Yes. The AC-019C complies with IEC international safety standards and EU RoHS environmental protection directives, with complete compliance attributes, which can pass the product certification of most countries and regions in the world.
Contact Us
We are a professional manufacturer specializing in the R&D, production and sales of various AC power sockets, DC power interfaces, switch accessories and electronic connecting components. With mature production technology, complete testing equipment and strict quality control system, we provide high-quality, cost-effective electronic accessories for global customers.
We support OEM, ODM customized services and batch wholesale orders. Whether you need product sample testing, bulk procurement, personalized customization or technical consultation, please feel free to contact us. We will provide you with professional product solutions, competitive factory prices and thoughtful after-sales service. We sincerely look forward to establishing long-term stable cooperative relations with global customers and creating win-win development.
