M10-8P Right-Angle Female Connector to Stripped & Tinned Wire Ends, Customizable Cable Length

Important Note: IP67 waterproof performance is only achieved when the M10-8P right-angle female connector is completely screwed and locked with the corresponding matching male connector. The stripped and tinned open wire end is non-waterproof and must be arranged inside equipment housing or control cabinet, and cannot be directly exposed to outdoor rain, dust and liquid splashing. This cable assembly is mainly used for low-voltage signal transmission and small-current auxiliary power supply, and is not applicable to high-current main power circuit. Customized length, wire gauge and shielding requirements may be subject to minimum-order quantity. Please confirm connector pin definition, wire color sequence, wire gauge and total cable length before placing orders. The 90-degree elbow design is suitable for narrow installation space and side-exit wiring scenarios.

This finished cable assembly adopts M10-8P 90-degree right-angle female circular connector at one end, and the other end is multi-core wires with 6.0 mm stripped and hot-tinned tips. The total cable length can be freely customized according to customer installation layout and mechanical space constraints. It is a mature pre-terminated wiring solution widely used for mini-size industrial sensors, precision detection equipment, small-size actuators, embedded control modules and internal signal interconnection of complete-set devices.

In many precision automation and miniature equipment projects, customers need to connect external M10-interface sensors or small actuators to internal circuit boards or terminal blocks. If there is no ready-made finished cable, operators need to purchase discrete M10-8P elbow connectors and bulk multi-core cables, and manually complete wire cutting, stripping, connector crimping assembly, wire end tin-dipping, continuity inspection and other procedures on site. Manual on-site processing has many inherent defects. The manual crimping quality is greatly affected by worker proficiency and tool condition; cold crimping, loose terminals and scattered wire strands may occur. Manual tin-dipping is prone to uneven tin layer, burr and wire strand dispersion. Meanwhile, manual processing is time-consuming, low-efficiency, and the consistency of finished products cannot be guaranteed. Different batches of self-made cables may have differences in stripping length, tin-dipping quality and assembly effect, which brings hidden risks to equipment debugging and long-term stable operation. Our factory pre-assembled and pre-tinned cable assembly effectively avoids these on-site processing problems.

First of all, 90-degree right-angle elbow connector saves installation space and optimizes wiring direction. The M10-8P female connector adopts right-angle outlet design, which is very suitable for narrow installation positions, side-mounted sensors and limited-space equipment interiors. Compared with straight-type connectors, the elbow structure can effectively avoid cable bending stress caused by vertical wiring, reduce excessive bending damage to the cable root, improve cable stress-relief performance, and extend the service life of the whole cable assembly. The screw-lock connection method ensures reliable locking after mating, provides good anti-vibration and anti-loosening performance, and is suitable for equipment working under continuous vibration conditions. Gold-plated contacts maintain stable electrical connection in complex industrial environments and reduce contact resistance.

Secondly, standardized factory pre-processing of stripped and tinned wire ends guarantees end-processing quality. The open wire end is precisely stripped to 6.0 mm insulation length by automatic equipment, and then uniformly hot-tinned. The tin layer is smooth and even, without scattered wire strands, burrs or virtual tin. The tinned wire tips can be directly used for PCB soldering, screw terminal wiring or secondary terminal crimping. Customers do not need to complete stripping and tin-dipping work on site, which greatly shortifies equipment assembly and wiring time, and eliminates quality differences caused by manual operation. Each finished cable is fully electrically tested before leaving factory, including pin-to-pin continuity detection, short-circuit inspection and visual appearance check, to ensure that each core circuit is conducted correctly without short-circuit risk.

Thirdly, multi-dimensional flexible customization meets diversified mechanical and electrical requirements. Besides arbitrary total cable length, customers can select appropriate wire gauge according to signal type and actual working current. Shielded cable is optional for weak analog signal transmission under strong electromagnetic interference environment to improve anti-interference performance. Two sheath materials are optional: PVC is cost-effective for fixed internal laying; PUR sheath has excellent oil-resistance, wear-resistance and bending fatigue-resistance, and is suitable for scenarios of frequent cable movement, dragging and oil splashing. We support custom wire color sequence and custom cable label printing for easy identification during installation and maintenance. Both small-batch sample prototype orders and large-volume mass-production orders for batch equipment are acceptable.

Fourthly, compact M10 miniature circular connector realizes miniaturized equipment interconnection. As a small-diameter circular industrial connector, M10 series is widely used in miniature sensors, precision measuring heads, small actuators and compact embedded devices. This cable assembly realizes quick transition from external M10 field interface to internal open-wire wiring. It can be directly connected to terminal blocks, welding pads and other internal connection points, reducing intermediate adapter accessories, simplifying BOM list, and reducing potential failure points brought by multiple intermediate conversions.

Fifthly, it reduces comprehensive production cost and after-sales rework risk for equipment manufacturers. After obtaining our finished cable, the production team skips multiple complex working procedures such as cable cutting, wire stripping, connector crimping assembly, manual tin-dipping and self-inspection. The assembly workload is significantly reduced, and quality fluctuation caused by different operator skill levels is avoided. It should be emphasized that the stripped-tinned open wire end has no waterproof capability, and must be placed inside closed equipment housing or protective cabinet. The M10-8P elbow connector can exert IP67 protection performance only under fully mated and locked condition.

Core Advantage Summary List:

• Pre-terminated cable assembly: M10-8P right-angle female circular connector to 6.0 mm stripped hot-tinned open wire ends
• 90-degree elbow outlet design, suitable for narrow-space and side-wiring installation, reducing cable root bending stress
• Factory-precise stripping and uniform hot-tinned wire tips, no scattered strands, directly for soldering or terminal connection
• 100% full-item electrical testing before delivery, ensure correct circuit conduction, eliminate hidden dangers of short-circuit and open-circuit
• Screw-lock M10-8P connector with gold-plated contacts, good anti-vibration and anti-loosening performance
• Fully customizable total cable length; optional wire gauge, shielded / non-shielded, PVC / PUR sheath
• Support custom wire color sequence and cable marking, convenient for on-site installation and later-stage maintenance
• Adapt to miniature sensor and compact equipment interconnection, reduce intermediate adapter parts, optimize BOM
• Eliminate on-site stripping, tin-dipping and connector assembly work, improve production efficiency and reduce rework risk
• RoHS-compliant raw materials, halogen-free option available for worldwide export industrial-equipment projects

This M10-8P right-angle female to stripped-tinned-end cable assembly is widely used in miniature industrial sensors, precision testing instruments, small-size actuators, embedded control modules and complete-set equipment internal wiring.

1. Miniature Industrial Sensor System

It matches various M10-interface miniature proximity sensors, photoelectric sensors, pressure sensors and displacement sensors. The elbow connector adapts to compact installation positions, and the tinned open-wire ends connect to internal control circuit terminals.

2. Precision Testing & Measuring Instruments

Precision detection equipment, measuring heads and small-size test fixtures adopt M10 interfaces for signal output. This finished cable transfers multi-channel sensor signals to internal circuit boards or terminal groups.

3. Small-Size Actuator & Compact Automation Machinery

Miniature electric cylinders, small-size solenoid valves and compact executing components use M10 circular interfaces. This cable completes signal and auxiliary power transmission between actuators and control units.

4. Embedded Control Module & Compact Equipment

Various compact embedded control devices reserve M10 external interfaces. The pre-fabricated cable is used as matching wiring for equipment assembly, suitable for mass production of small-volume compact machines.

5. R&D Prototype & Test Bench Projects

In the equipment research-and-development stage and test-bench construction, it can quickly realize the connection between M10-interface components and internal circuits, shorten prototype debugging cycle.

6. Complete-Set Equipment Cabinet Internal Wiring

System integrators apply this cable inside small control cabinets, connect external miniature field devices to cabinet-internal terminal blocks and circuit boards, realize neat and standardized wiring.

Q1: What is the waterproof grade of this cable? Are both ends waterproof?
A1: Only the M10-8P elbow female connector can reach IP67 waterproof level, which takes effect only after being fully screwed and locked with the matching male plug. The stripped and tinned open-wire end is non-waterproof and must be installed inside equipment housing or protective cabinet, not for direct exposed outdoor application.

Q2: Can I customize cable length, wire gauge and wire color sequence?
A2: Yes. We support custom total cable length, wire cross-section and wire color arrangement according to your drawings and technical requirements. Custom parameters may involve minimum-order quantity, please confirm with sales team when placing orders.

Q3: Can I choose shielded cable? Under what circumstances is shielding needed?
A3: Shielded construction is optional. It is recommended to select shielded cable for analog weak-signal transmission under strong electromagnetic interference environment. Non-shielded version is cost-effective for ordinary digital switching-signal and small-current auxiliary-power circuits.

Q4: What is the difference between PVC and PUR sheath, how to choose?
A4: PVC is suitable for fixed laying inside equipment, with good cost-performance. PUR sheath has better oil-resistance, abrasion-resistance and bending-fatigue-resistance, for scenarios with frequent cable movement, dragging and oil pollution.

Q5: What is the maximum current the cable can withstand? Can it be used for high-power main-power loop?
A5: The actual bearing current depends on the selected wire gauge. This cable assembly is designed for signal transmission and small-current auxiliary power supply, and is not recommended for high-current main-power circuit. Please select wire gauge according to actual working current.

Q6: What is the function of 6.0 mm stripped hot-tinned end? What connection methods are supported?
A6: 6.0 mm is standard stripping length, after hot-tinning, wire ends can be directly soldered to PCB pads, connected to screw terminals, or subjected to secondary crimping of other terminals. No additional on-site stripping and tin-dipping is required.

Q7: Signal abnormal after installation, which points should be checked?
A7: Please check the following key points: confirm M10-8P connector is fully screwed-locked; check whether the tinned wire end has loose wire strands or short-circuit between cores; verify wire color sequence matches equipment definition; inspect cable sheath for scratch and damage. Replace cable assembly if physical damage exists.

Q8: Does the product include matching M10-8P male plug?
A8: Only this finished cable assembly is provided. Matching M10-8P male connector is not included in the package, customers need to purchase mating accessories according to project design.

Q9: Can small-batch sample order be supported? Is there MOQ for customized specifications?
A9: Standard-spec samples are available. For fully customized wire gauge, special length and special wire-color sequence, minimum-order-quantity requirement may apply, please consult our sales team.

Q10: Can halogen-free material be provided for export-oriented projects?
A10: Yes, halogen-free raw-material option can be supplied upon request to meet international environmental-protection procurement standards for overseas equipment exports.

Thank you for reading product document of M10-8P Right-Angle Female Connector to Stripped & Tinned Wire Ends, Customizable Cable Length. Our company is specialized in R&D, design and manufacturing of M10 / M12 circular connector cable assemblies, elbow sensor cables, various stripped-tinned finished wiring harnesses and non-standard custom industrial interconnection solutions. Our products are widely supplied to industrial automation, precision testing instruments, sensor systems, embedded equipment and special-purpose machinery industries.

We provide standard off-the-shelf cable assemblies, meanwhile offer comprehensive custom services: customizable cable total length, wire gauge, shielded / non-shielded, PVC / PUR / halogen-free sheath material, custom wire color sequence and custom cable label marking.

If you have technical consultation for parameter confirmation, custom harness demand, sample trial application, bulk-order quotation or project-targeted interconnection-solution development, please get in touch with our sales-support and technical team.

Our complete product portfolio covers M10 miniature sensor cables, M12 sensor cable assemblies, elbow circular connector harnesses, stripped-tinned open-end cables, multi-branch composite harnesses and various non-standard custom wiring harness. We support small-batch sample trial, mass-volume-production delivery and project-oriented customized development.

Please send your inquiry including product model, required cable length, wire-gauge requirement, order quantity, application environment and other special technical specifications. Our professional sales and technical team will reply promptly and provide targeted technical suggestions plus formal commercial quotation.